#4522 LED PAR46 Replacement Aircraft Landing Light | Aero-Lites Fusion 46LR

Description

#4522
13-Volt
PAR46 LED Replacement Lamp |  5,200LM | 10-30V
Overview
Technical Specifications
Overview
Technical Specifications
The high performance FUSION 46LR  (PAR46 5.75" diameter) LED replacement lamp is a direct form/fit replacement for 12/28-Volt legacy glass sealed beam bulbs. While not FAA-PMA'd this lamp is engineered to outperform EVERYTHING on the market, while maintaining a pricepoint that is inclusive to virtually anyone in the market for a high performance drop-in LED replacement to the failure-prone incandescent versions. 18 3-watt CREE XP-E LED chips develop a stunning 5,200+ lumens. As the name implies, the FUSION46 utilizes a proprietary dual-purpose lens with both linear spreader optics on four LEDs (facilitates close-proximity flood lighting for ground-based night operations) and also a high output 10 degree spot beam optic ( for long distance lighting for and daytime recognition/running light). This design gradually blends the peripheral lighting to effectively eliminate the "hotspot" to shear darkness that is common to the filament bulbs as well and other higher cost LED lights on the market. Engineered as a direct replacement for ALL PAR 46 legacy lamps. Although engineered to demanding aviation applications, which require RF attenuation and aviation grade components throughout, this lamp can be utilized in any PAR46 replacement application requiring maximum light output. Cutting-edge LED technology requires only a fraction of the power while providing a stunningly bright  light.
​​​​​​​
​
DROP-IN REPLACEMENT FOR:
GE 4522, 4551, 4553, 4554, 4570, 4571,  4580, 4581, 4582
*NOT FAA/PMA APPROVED
LED Parameters:
18pc 3watt CREE XP-E
Input Voltage:
+10 to + 30 VDC
Current:
3.65 Amps @ 14VDC / 1.8 Amps @ 28VDC
Luminous Flux
5,200lm
Color Temp:
6,000K
Beam Projection:
10° Vert 10° Horizont
Modes:
Steady ON
Duty Cycle:
Continuous; Thermally Regulated Decrement Intensity
Housing Material:
Powder Coated Aluminum Alloy
Lens Material:
Shatterproof Polycarbonate
Design Life:
> 20,000hrs
Wire Termination:
8-32 SAE Screw Teminals; Brass Material
ANSI Spec:
PAR46
Dimensions:
5.71"dia x 3.08" depth
Certifications:
Not FAA/PMA Approved
DESIGNED | DEVELOPED | DISTRIBUTED
IN THE USA
Guaranteed EMI/RFI Free
WHY CHOOSE AERO-LITES?
— Guaranteed plug and play fit for all PAR 46 size housings.
— Extreme brightness for night landing and daytime recognition.
— 20,000hr average service life.
— Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment.
— Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition.
— No heat facilitate continuous use without fear of melted acrylic lens cover fairings.
— Less load on alternator/generator for increased service life.
— Less demand on battery for longer service life.
— Increased brake horsepower due to less load on the alternator/generator.
— Better fuel economy/longer range due to less load on alternator/generator.
1
#4522
13-Volt
PAR46 LED Replacement Lamp |  5,200LM | 10-30V
Overview
The high performance FUSION 46LR  (PAR46 5.75" diameter) LED replacement lamp is a direct form/fit replacement for 12/28-Volt legacy glass sealed beam bulbs. Engineered to outperform EVERYTHING on the market, while maintaining a pricepoint that is inclusive to virtually anyone in the market for a high performance drop-in LED replacement to the failure-prone incandescent versions. 18 3-watt CREE XP-E LED chips develop a stunning 5,200+ lumens. As the name implies, the FUSION46 utilizes a proprietary dual-purpose lens with both linear spreader optics on four LEDs (facilitates close-proximity flood lighting for ground-based night operations) and also a high output 10 degree spot beam optic ( for long distance lighting for and daytime recognition/running light). This design gradually blends the peripheral lighting to effectively eliminate the "hotspot" to shear darkness that is common to the filament bulbs as well and other higher cost LED lights on the market. Engineered as a direct replacement for ALL PAR 46 legacy lamps. Although engineered to demanding aviation applications, which require RF attenuation and aviation grade components throughout, this lamp can be utilized in any PAR46 replacement application requiring maximum light output. Cutting-edge LED technology requires only a fraction of the power while providing a stunningly bright  light.
​​​​​​​
​
DROP-IN REPLACEMENT FOR:
GE 4522, 4551, 4553, 4554, 4570, 4571,  4580, 4581, 4582
*NOT FAA/PMA APPROVED
Technical Specifications
LED Parameters:
18pc 3watt CREE XP-E
Input Voltage:
+10 to + 30 VDC
Current:
3.65 Amps @ 14VDC / 1.8 Amps @ 28VDC
Luminous Flux
5,200lm
Color Temp:
6,000K
Beam Projection:
10° Vert 10° Horizont
Modes:
Steady ON
Duty Cycle:
Continuous; Thermally Regulated Decrement Intensity
Housing Material:
Powder Coated Aluminum Alloy
Lens Material:
Shatterproof Polycarbonate
Design Life:
> 20,000hrs
Wire Termination:
8-32 SAE Screw Teminals; Brass Material
ANSI Spec:
PAR46
Dimensions:
5.71"dia x 3.08" depth
Certifications:
Not FAA/PMA Approved
Guaranteed EMI/RFI Free
DESIGNED | DEVELOPED | DISTRIBUTED
IN THE USA
WHY CHOOSE AERO-LITES?
— Guaranteed plug and play fit for all PAR 46 size housings.
— Extreme brightness for night landing and daytime recognition.
— 20,000hr average service life.
— Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment.
— Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition.
— No heat facilitate continuous use without fear of melted acrylic lens cover fairings.
— Less load on alternator/generator for increased service life.
— Less demand on battery for longer service life.
— Increased brake horsepower due to less load on the alternator/generator.
— Better fuel economy/longer range due to less load on alternator/generator.
1