HA-ⅠComputer Control Bearing Heater Electromagnetic induction gear quick release

Description

Item specifics
Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
See all condition definitionsopens in a new window or tab
Origin
CN(Origin)
Brand
Unbranded
Rated voltage
220V
Workpiece inner diameter
30-70mm
Dimensions
400*290*345mm
Control method
emperature control, aging, manual control
MPN
Does not apply
Outer diameter/height
250/1 10mm
|Heating temperature
MAx. 250C
Certification
FCC
Item Weight
20kg
Rated power
2.2KVA
UPC
Does not apply
Item description from the seller
HA-ⅠComputer Control Bearing Heater Electromagnetic induction gear quick release installation Bearing Heater
1. Purpose
HA series heaters are mainly used to heat various types of metal parts such as bearings, gears, bushes, shaft sleeves, diameter rings, pulleys, shrink rings, connectors, etc., and expand them through heating to achieve interference assembly. Need.
2. Structure
The HA series heater is installed on the trolley by the combination of the main engine and the control box. The mobile structure is convenient for on-site construction and flexible application. The removable iron is directly used to wear bushings or other heating workpieces. This series of heaters All the irons are equipped with rotating beams, which are more convenient to use.
3. Advantages
1. Clean
Traditional methods, such as fire roasting, oil boiling, and oven roasting, are not only costly, but also produce coke smoke, odor and waste oil, which waste time and energy. The application of induction heaters can replace traditional methods and create a clean working environment.
2. Fast and no damage
After heating, the bearing expands outward in the cylindrical direction, which can avoid damage during installation. Induction heating is a good heating method, and it does not need to be preheated. Depending on the weight and size of the bearing, it can be heated to 120°C in a few seconds or minutes without damaging the pre-lubrication.
3. Reasonable design
In order to meet the requirements of the industrial environment, the design concept of the heater is modern, rational, easy to operate, and highly durable.
Model HA- I
Rated power 2.2KVA
Rated voltage 220V
Workpiece inner diameter 30-70mm
Outer diameter/height 250/1 10mm
Dimensions 400*290*345mm
The weight of the machine is 20kg.
|Heating temperature|MAx. 250C
Control method | temperature control, aging, manual control